Download Print this page

To Remove Grease Filter - Hotpoint Counter Saver RVM12 Series Use And Care Manual

Advertisement

The exhaust hood feature on your microwave oven is equipped with
2 metal filters which collect grease. When the fan is operated, air is drawn
up through the filters and is then discharged through the provided venting
to the outside.
Reusable Grease Filters
The grease filters should be cleaned at least once a month. Never
operate the microwave without the filters in place. In situations where
flaming might occur on surfaces below hood, filter will stop the entry of
flames into the unit.

To Remove Grease Filter

To remove grease filter,
grasp the "finger hold"
on the filter and slide to
the rear. Then pull filter
downward and to the
front. The filter will
drop out.
Charcoal Filter Kit
There is a Recirculating Charcoal Filter Kit available
for models that are not vented to the outside.
(for some models)
METAL
FILTER cOOKTOp
To Clean and Replace Grease Filter
To clean grease filter, soak it and then agitate filter
in solution of hot water and detergent. Don't use
ammonia or ammonia products because they will
darken the metal. Light brushing can be used to
remove embedded dirt.
Rinse, shake and remove moisture before replacing.
To replace grease filter, slide the filter in the frame
slot on the back of the opening.
Pull filter upward and to the front to lock into place.
Filter Kit model JX-81A can be ordered from your
METAL
I
FILTER
LIGHT
23

Advertisement

loading

This manual is also suitable for:

Counter saver rvm125kCounter saver rvm122k