Advertisement
Dispensing Water
Default time of water flow: 10s.
8. Put your water cup on drip tray and press the "WATER" button once on control panel
(Button C). The water will flow out from middle water tap, the "
" symbol will display and
"10s" will display in the TIMER delay section. After 10 seconds, the "
" symbol disappears,
and water dispensing will finish. If the water flowing time is too short or too long, you can
manually change this.
To change the dispensing time, press the "WATER" button for more than 5 seconds. "10s" will
appear in the display. Press the "SELECT" button to select the suitable time range from 7
seconds to 25 seconds. After 5 seconds of not pressing anything, the setting will save, and
the new digit will disappear and be remembered. Next time you dispense water, it will pour
for the new set time.
Draining Water
9. When you clean the unit's internal parts or change the drinkable water, you need to drain
out the remaining water in the water reservoir by unplugging the water drain cap located at
the bottom of the unit, near the water drip tray.
The water will flow out from the unit completely. You can connect a soft plastic tube to help
guide the draining water.
10. Change water in the water reservoir for every 24 hours to ensure a reasonable hygiene
level. If the unit isn't to be used, drain all water and dry the water reservoir.
7
Advertisement
