Advertisement
Ice cubes on the
evaporator stick
together.
There are ice cubes
inside the unit, but it
can't dispense the ice
cubes when you push
"
"
the
ICE
button.
Ice making cycle is
normal, but no ice is
made.
Disposal
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/
The ice cube maker
doesn't reset normally.
The ice making cycle is
too long.
Water temperature in
inner tank is too low.
Moving shaft for the
ice cubes is blocked.
Ambient temperature
or water temperature
in inner tank is too
high.
Refrigerant liquid
leakage.
Pipe in the cooling
system is blocked.
10
Contact Kogan.com or a qualified
technician to check the problem.
Stop the ice cube maker and restart it
after the ice blocks melt. Select small
sized ice cubes.
Change the water in the inner tank.
Temperature of water is better if set
between 7°C-32°C.
Release the button for 3 seconds and
push the "ICE" button again.
Please run the ice cube maker below
32°C and pour colder water into tank.
Verify with a qualified technician or
contact Kogan.com.
Verify with a qualified technician or
contact Kogan.com.
Advertisement
