Glossary - Sony TA-VA80ES Operating Instructions Manual

Sony integrated av amplifier operating instructions
Hide thumbs Also See for TA-VA80ES:
Table of Contents

Advertisement

Available languages

Available languages

Glossary

Center mode
Setting of speakers to enhance Dolby Pro Logic Surround
mode. To obtain the best possible surround sound, specify
the type of each speaker (page 16) according to your speaker
system.
For your reference, the following table shows the
relationship between the speaker type parameters and the
center mode.
FS
CS
RS
SMALL
SMALL
SMALL
LARGE
SMALL
SMALL
SMALL
SMALL
LARGE
LARGE
SMALL
LARGE
LARGE
LARGE
SMALL
LARGE
LARGE
LARGE
SMALL
LARGE
SMALL
SMALL
LARGE
LARGE
SMALL
NO
SMALL
LARGE
NO
SMALL
LARGE
NO
LARGE
SMALL
NO
LARGE
LARGE
SMALL
NO
LARGE
LARGE
NO
SMALL
SMALL
NO
SMALL
LARGE
NO
FS: Front speaker size
RS: Rear speaker size
CS: Center speaker size
C.Mode: Dolby Pro Logic
Delay time
Time lag between the surround sound output from front
speakers and rear speakers. By adjusting the delay time of
the rear speakers, you can obtain the feeling of presence.
Make the delay time longer when you have placed the rear
speakers in a small room or close to your listening position,
and make it shorter when you have placed them in a large
room or apart from your listening position.
Dolby Digital (AC-3)
This is a new digital surround system proposed to reproduce
Dolby SR-D (the 3 dimensional sound system developed for
use in movie theaters) in the home. This technology allows
you to enjoy the full 5.1 ch soundtrack intended by the
filmmaker, in the comfort of your own home.
Dolby Pro Logic Surround
Decoding system of Dolby Surround sound standardized in
TV programs and movies. Compared with the former Dolby
Surround system, Dolby Pro Logic Surround improves
sound image by using four separate channels: off-screen
audio effects, on-screen dialog, left-to-right panning, and
music. These channels manipulate the sound to be heard and
enhance the action as it happens on the screen. To take
advantage of Dolby Pro Logic, you should have at least one
pair of rear speakers and/or one center speaker. You also
need to select the appropriate center mode to enjoy a full
effect.
C.Mode
Effect level
Combination of the level of early reflections and
reverberation. You can adjust the effect level in 21 levels. As
NORMAL
you select higher levels, the room becomes "live," and as
you select lower levels, the room becomes "dead."
Parameter
NORMAL
Variable of sound that composes sound image, such as tone
WIDE
or delay time. You can customize the pre-programmed
sound fields by adjusting parameters to suit your listening
WIDE
situation.
Sound field
Sound pattern produced by a sounding source or sources in
a given environment due to direct and reflected sounds and
the acoustics of the environment.
PHANTOM
Surround sound
Sound that consists of three elements: direct sound, early
PHANTOM
reflected sound (early reflections) and reverberative sound
(reverberation). The acoustics where you hear the sound
affect the way these three sound elements are heard. These
sound elements are combined in such a way that you can
3CH LOGIC
actually feel the size and the type of a concert hall.
• Types of sound
center mode
• Transition of sound from rear speakers
Getting Started
Additional Information
Reverberation
Early reflections
Direct sound
Direct sound
Early
Level
reflections
Reverberation
Early reflection time
Time
EN
27

Advertisement

Table of Contents
loading

Table of Contents