Sound Adjustment; Using Pre-Programmed Sound Fields - Sony TA-VE610 Operating Instructions Manual

Dolby Surround Setup

Sound Adjustment

z
What is the test tone?
Signal given out by the amplifier for adjusting the
speaker volume. The test tone will come out as follows:
• In a system with a center speaker (NORMAL/WIDE/
3 CH LOGIC modes)
The test tone is output from the front L (left), center,
front R (right), and rear speakers in succession.
• In a system without a center speaker (PHANTOM
mode)
The test tone is output from the front and the rear
speakers alternately.
EN
16
Front (L) Front (R)
Center
3 CH LOGIC
Rear (L, R)
NORMAL/WIDE
Front (L, R)
PHANTOM
Rear (L, R)
Sound Adjustment
Using Pre-programmed Sound
Fields
You can take advantage of surround sound simply by
selecting one of the pre-programmed sound fields
according to the program you want to play.
POWER
TONE
SUR INDEX
VIDEO 1 VIDEO 2 VIDEO 3 TV/LD
DPC
MODE
SPEAKERS
A
OFF B
+
A B
VIDEO FUNCTION
PHONES
DIMMER DISPLAY
1
Press SOUND FIELD ON/OFF to turn on the
sound field.
One of the indicators lights up in the display.
2
Press GENRE to select the type of sound field you
desire.
3
Press MODE to select the mode you desire from
the respective genre.
Select the appropriate sound field according to the
chart on page 17.
To play without surround effects
Select "ACOUSTIC" from MUSIC. The surround
effects are defeated but you can still adjust the tone
parameter (see page 18).
To turn off the sound fields
Press SOUND FIELD ON/OFF.
z
You can find Dolby Surround-encoded software by
looking at the packaging
However, some videos and laser discs may use Dolby
Surround sound even if it's not indicated on the
package.
Note
Sound fields are turned off whenever the program source
connected to the 5.1 INPUT jacks is selected.
SOUND FIELD ON/OFF
MASTER VOLUME
TAPE/MD CD TUNER PHONO
DIRECT PASS
5.1 INPUT
BALANCE
BASS
BOOST
DIRECT SOUND FIELD
PASS
SET UP ON / OFF
GENRE MODE
AUDIO FUNCTION 5.1
L R
INPUT
VIDEO 3 INPUT
S VIDEO VIDEO L AUDIO R
GENRE MODE