Recording - Sony TA-FE910R Operating Instructions Manual

Recording

1
PROTECTION
POWER
g
+
A B
PHONES
z
You can record the same
source on two recording
components at the same
time
z
You can monitor the
recorded sound (Tape
Monitor function) (TA-
FE910R/FE710R/FE610R/
FE510R only)
You can monitor the
recorded sound if the tape
deck you are recording on
has separate playback and
recording heads.
To monitor the sound, set
TAPE MONITOR to TAPE1
or TAPE2 (TA-FE910R/
FE710R only) or press
TAPE1 MONITOR (TA-
FE610R/FE510R only).
Note that on the TA-
FE610R/FE510R, you can
monitor the only sound
being recorded from the
TAPE1/DAT jacks.
SPEAKERS BASS TONE TREBLE BALANCE
A • • •
OFF B
– + – +
10 10 10 10 LEFT RIGHT
1
Press POWER to turn on the amplifier.
2
Turn on the programme source you want to record.
3
Select the programme source that you want to record by
turning INPUT SELECTOR.
The indicator for the programme source lights up.
To record a
Record
Radio broadcast
Compact disc
Source connected to AUX
Source connected to:
—TAPE1/DAT
—TAPE2/MD
4
Prepare the recording component for recording, then start
recording.
5
Start playing the programme source.
TAPE1/DAT TAPE2/MD AUX CD TUNER PHONO
INPUT SELECTOR
SUBSONIC
Ø ON ø OFF
SOURCE
LOUDNESS TAPE MONITOR
DIRECT
Ø ON ø OFF
SOURCE
TAPE1 TAPE2
0
3
Set INPUT SELECTOR to
PHONO
TUNER
CD
AUX (unavailable on the TA-
FE210)
TAPE1/DAT
TAPE2/MD
Basic Operations
VOLUME
EON LINK
10
9 EN