Basic Operations - Sony TA-FE910R Operating Instructions Manual

Basic Operations

z
What is the Enhanced
Other Networks (EON)?
One convenient RDS service
is "Enhanced Other
Networks" (or "EON").
This allows the unit to
automatically switch to a
programme type of your
choice when one starts in
your broadcast area.
8 EN
To receive the Enhanced Other Networks (EON) programmes (TA-
FE910R/FE710R/FE610R/FE510R only)
When your ampifier is connected to a Sony tuner with the EON CONTROL
system, the amplifier switches to any EON programme that is broadcast in
your EON area, and switches back to the last selected programme source
when the programme ends.
PROTECTION
POWER
SPEAKERS BASS TONE TREBLE
g
A •
OFF B
A + B
PHONES
– + –
10 10 10
1
Make sure that the amplifier and the tuner are connected through the
EON CONTROL terminals (see page 5).
2
Press EON LINK so that the indicator lights up.
Whenever an EON programme starts on the radio frequency that your
tuner is set to, you will receive it.
To cancel EON reception
Press EON LINK again so that the indicator goes off.
Notes
•If you select another programme source while receiving an EON programme, EON
reception ends. However, as long as the EON LINK indicator lights up, you can
receive EON programmes automatically.
•Make sure to cancel EON reception before starting to record since an EON
programme may interfere with your recording.
•If you activate the Tape Monitor function (see page 9) while the EON LINK indicator
is lit, the indicator goes off and you cannot receive EON programmes. If this
happens, deactivate the Tape Monitor function so that the indicator lights up again.
EON LINK
TAPE1/DAT TAPE2/MD AUX CD TUNER PHONO
VOLUME
INPUT SELECTOR
SUBSONIC
Ø ON ø OFF
BALANCE
• •
SOURCE
LOUDNESS TAPE MONITOR DIRECT
Ø ON ø OFF
SOURCE
TAPE1 TAPE2
0 10
+
10 LEFT RIGHT
EON LINK