Cleaning And Maintenance; Cleaning The Shaver Under The Tap - Philips 5000 Series Manual

Cleaning and maintenance

Cleaning the shaver under the tap

Note: Grab the comb in the center to pull it off
the beard styler. Do not pull at the sides of the
comb.
2 Switch on the appliance.
3 You can now start contouring your beard,
moustache, sideburns or neckline by moving
the styler downwards with gentle pressure
while holding it perpendicular to the skin.
4 Clean the attachment after use (see 'Cleaning
and maintenance').
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip out
of the base of the shaver. This is a normal
occurrence.
1 Switch on the appliance.
19
English