Using The Click-On Attachments; Removing Or Attaching The Click-On Attachments - Philips 5000 Series Manual

16
English

Using the click-on attachments

7 Switch off the appliance and clean it after each
use.
Note: Make sure you rinse all foam or shaving gel
off the appliance.
Turbo setting (specific types only)
The appliance is equipped with a Turbo or Turbo+
setting. This allows you to shave hard-to-reach
areas more quickly.
1 Switch on the appliance.
2 To activate the Turbo setting, press the Turbo
button once when the appliance is switched on.
3 Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Circular movements provide better
shaving results than straight movements.
4 To deactivate the Turbo setting, press the Turbo
button once.
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.
Removing or attaching the click-on
attachments
1 Make sure the appliance is switched off.