Advertisement
INPUTTING CHARACTERS
[Example] Printing "C-2" on the profile PO-05.
PRINTED RESULTS
9
While holding down [Shift],
press [C].
C
Press [-].
10
C-
Press [2].
11
C-
2
PRINTING
Press [Print].
12
Make sure that "Tube" is selected.
"No ribbon cassette" is displayed if the ribbon cassette is not installed. Install
the ribbon cassette. "No ribbon information. No ribbon amount displayed.
Press enter" is displayed if the information cannot be read due to the ribbon
cassette failure and so forth. If this message is displayed, follow the instruction
on the screen.
Press [Enter].
13
Make sure that size PO-05 is selected.
Press [Enter].
14
Make sure that "Sets to print" is "1".
Press [Enter].
15
The tube is automatically fed into the printer
and printing begins. Once printing is comple-
ted, the tube is cut automatically.
16
Take out the cut tube.
ATTENTION!
IF YOU ACCIDENTALLY INPUT AN INCORRECT
CHARACTER
ex. Although you meant to enter "C-2",
you entered "C=2" by mistake.
1
Press [
] and [
] and move the cur-
sor box to the position of the "2".
C=
2
2
Press [Back Space].
The "=" disappears.
C
2
3
Press [-].
C-
2
Advertisement
