Operation - Partner K2300 EL Operator's Manual

Operation
20. Always hold the cut-off saw with both hands whrle the motor IS running Use a firm gnp wrth
thumbs and fingers encrrclmg the handles. Keep all parts of your body away from the cut-off
wheel when the motor is running.
21. Do not cock, jam or wedge the wheel in the cut.
22. Do not grind with the side of a cut-off wheel.
NEVER CUT WITH SIDE OF WHEEL
23. Secure work with clamps, or a vise. It is safer than using your hand and frees both hands to
operate the tool.
24. Don't force tool. Use the right tool for the job. Don't overload. Keep the RPM high for best cut-
ting speed and cooling. Too low an RPM may result in overheating and burn out.
25.
A
WARNING: Do not water cool due to the risk of electrocution.
Handling and Service
26. Don't abuse the the cord. Never carry tool by the cord or yank on the cord. Keep cord away
from heat, oil and sharp edges.
27. Disconnect tools before servicing, when changing wheels and when not in use.
28. Avoid unintentional starting. Don't carry a tool that's plugged-in with your finger on the switch.
Be sure the switch is off when plugging in saw.
29. Remove the cutter wheel when transporting or storing the saw. Store tool in a high or locked
dry place out of reach of children.
30. All service, with the exception of service described in this owner's manual, must be carried
out by an authorized service workshop.
F
s