Specifications - Sony TA TA-MR2ES Installation Manual
System integration 2ch amplifier
Hide thumbs
Also See for TA TA-MR2ES:
- Service manual (26 pages) ,
- Specification sheet (2 pages) ,
- Technical background (38 pages)
Table of Contents
Advertisement
Specifications
Continuous average power output (FTC):
35 W per channel min. RMS at 8 ohms,
both channels driven from 20 Hz to
20 kHz with no more than 0.09 %
THD.
40 W per channel min. RMS at 4 ohms,
both channels driven from 20 Hz to
20 kHz with no more than 0.09 %
THD.
5 Hz – 100 kHz + 0.5/–2 dB
Frequency responce:
Residual noise (A-weighted):
150 µV or less
Channel separation (1 kHz/10 kHz):
(input 4.7 k ohms terminated)
60 dB/45 dB
Signal-to-noise ratio:
94 dB (A-weighted filter, 150 mV input)
Audio input
Sensitivity:
150 mV
Impedance:
50 k ohms
Audio output
Voltage:
minimum 2 V without clipped
Impedance:
1 k ohms
S/N:
102 dB (A-weighted filter, 2 V output)
General
12V trigger IN:
accept 10 ~ 12 V of trigger
12V trigger OUT:
300 mA max
IR input:
accept up to 40 kHz IR modulation
frequency
IR output:
buffered, 5 V
Power requirements:
120 V AC, 60 Hz
Power consumption:
100 W
430 ✕ 67 ✕ 350 mm (w/h/d)
Dimensions:
Mass:
6.5 kg
Design and specifications are subject to change without notice.
US
18
Advertisement
Table of Contents
