Sony TA TA-MR2ES Installation Manual page 9

If you install the amplifier in a closed cabinet, install two
small box fans in the cabinet to provide continuous
ventilation.
Boxer fan (55 CFM)
Note
Attach box fans also if you connect low-impedance speakers (less
than 8 ohms nominal).
Using rack-mount brackets
You can also mount the amplifier into a rack. Make sure
that you measure the space needed before mounting.
1 Install the rack-mount brackets onto the amplifier
with the supplied screws as shown below.
Make sure that the rack-mount brackets are installed
securely.
Rack-mount
bracket
screws
(supplied)
screws
(supplied)
2 Mount the amplifier into the rack as shown below.
Make sure that the amplifier is installed securely.
rack
screws
(not supplied)
Notes
• Use screws with a minimum diameter of 3/16 inch when you
mount the amplifier into the rack.
• Make sure you check the rack manufacturer's specifications
before you mount the amplifier into the rack. This is to ensure
mechanical stability.
• This amplifier requires 2U height space when you mount the
amplifier on a standard rack.
Rack-mount
bracket
+ +
rack
screws
(not supplied)
US
9