Table of Contents
Advertisement
Quick Links
General Description
The PhoneAlarm automatically dials a preprogrammed telephone
number and sounds an alarm tone when the temperature exceeds the
alarm setpoint. The PhoneAlarm will redial until it is disabled.
Applications
Remote temperature alarm for monitoring of unoccupied buildings
and environments. Applications include furnace failure (freeze
protection) air conditioning, agriculture, greenhouses, computer
rooms, etc.
Features
• Operates on rotary or touch tone phone lines
• Programmable "call-to" number, up to twelve digits
• Three hour or fifteen minute call out frequency
• Programmable keypad
• Select switch for either alarm on temperature fall or
alarm on temperature rise
Specifications
Power requirements: 9 volt battery (not included)
Sensor: Fixed setpoint thermistor (12" lead on "E" model)
Accuracy: +3°F
Ambient temperature range: 20° to 140°F (-7 to 60°C)
Dimensions & Wiring
3.25"
(83mm)
Front
1724 Lake Drive West • Chanhassen, MN 55317 • 952-448-2217 FAX 952-448-1606 • Made in USA
Innovative Technologies in Custom Electronic Design & Manufacturing
5.94"
(151mm)
Rear
PhoneAlarm
PA-1145-I / PA-1145-E
PA-1185-I
• Automatic reset
• Memory backup
• Two or eight ring call out
• Dial indicator light
• Remote sensor ("E" model only)
• FCC approved
Humidity: 90% non-condensing
Weight: 7.5 oz
Agency approvals: FCC part 68
Ringer equivalence: 0.0B (ac)
Side
1.75"
(44mm)
Top
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Control Products PhoneAlarm Series
Summary of Contents for Control Products PhoneAlarm Series
- Page 1 Innovative Technologies in Custom Electronic Design & Manufacturing General Description The PhoneAlarm automatically dials a preprogrammed telephone number and sounds an alarm tone when the temperature exceeds the alarm setpoint. The PhoneAlarm will redial until it is disabled. PhoneAlarm PA-1145-I / PA-1145-E Applications PA-1185-I Remote temperature alarm for monitoring of unoccupied buildings...
- Page 2 5. Individual at "call-to" location must answer the phone to verify the alarm tone. If the person does not receive or hear the alarm tone, call Control Products for customer service. When red indicator light goes out, the test sequence is complete and disabling is not required.
- Page 3 45°F (7°C) 85°F (29°C) Custom Design & Modifications In addition to standard models, Control Products specializes in the complete custom design of controls. Modifications of our standard controls are also available. Please consult factory for more information. Limited Warranty Limited Warranty: 1.
- Page 4 One Year Limited Warranty - Control Products, Inc. warrants its products to be free from defects in material and workmanship under normal use for one year, and is not responsible for consequential damages or installation costs of any nature. In the event that the Product does not conform to this Warranty at any time during the period of one year from original purchase date, Warrantor will repair the defect and return it to you at no charge.
Need help?
Do you have a question about the PhoneAlarm Series and is the answer not in the manual?
Questions and answers
how to stop the alarm from an other location tostop it from calling over and over.
To stop the Control Products PhoneAlarm Series alarm from calling repeatedly from another location, call the PhoneAlarm's phone number. After 16 rings, the PhoneAlarm will answer and sound an alarm tone, confirming the unit is now disabled.
This answer is automatically generated