Subscribe to Our Youtube Channel
Related Manuals for Control Products MA-D
Summary of Contents for Control Products MA-D
- Page 1 $IIRUGDEOH6HFXULW\IRUWKH +RPH&DELQDQG%XVLQHVV Minneapolis, Minnesota U.S.A. (952) 448-2217 www.ProtectingYourHome.com Document P/N: 42420010C Rev. 05-03, Rev. C...
-
Page 2: Table Of Contents
This message may be recorded b) PIR Motion Sensor on an answering machine or voice mail when the MA-D calls out. If 3.3 Sleep Mode a sensor remains in an alarm state (either a door or window remains 3.4 Low Battery Indication... -
Page 3: Check Components
1. Check Components 1.1 Components included with this System: Your MA-D alarm kit is designed to be a complete system for your home, cabin, apartment or business. Note that none of the components are designed for outdoor use. The kit includes: •... -
Page 4: Installing Your System
Zone: On when one of the sensors is activated the unit over the screw heads. When you are ready to power up the system, connect the 12V adapter to the wall socket. Program mode: On when the system is put into the Program mode. -
Page 5: Pir Motion Sensor
2.3 PIR Motion Sensor: The PIR Motion Sensor should be located in an indoor area. The sensor will not operate properly in temperatures of less than 40°F (5°C). Determine the proper height of the motion sensor by estimating the depth of the space to be monitored. In general, the range of the PIR sensor is about 30 feet (9 meters). -
Page 6: Phone, Power And Siren Connections
Control Unit. See the diagram on the following page. they are not active when the Control Unit is in the HOME mode. This allows you to freely move above your home and still have the MA-D protecting your doors and windows. -
Page 7: A) Door Or Window Sensor
1 ½ years. It is highly recommended you change out these batteries once a year at a minimum! The MA-D Control Unit will indicate a low battery when one of the sensors has a low battery. To locate the device with the low battery, place the system in the disarm mode. -
Page 8: Adding Additional Sensor Devices
4.1 Program Mode: In order to change the settings of the MA-D Control Unit you first need to put it into the Program Mode. You do this by entering in your pass code and pressing the # key. This will turn on the program LED. -
Page 9: Turning Siren On And Off
Keep on entering the rest of the sequence though until the LED light remains solid. The MA-D will allow you to turn the Siren on or off. First enter your pass code (0000) then push the # key then push the 6 key. One beep 4.5 Disarming the Alarm:... -
Page 10: Recording Voice Message
Pressing the Help button will cause the controller When using the Voice feature of the MA-D, you will need to record to send an audible panic alarm telling the Control Unit to call your the address of where the alarm is coming from. -
Page 11: Contacting Us & Technical Support
4. 6. Contacting Us & Technical Support: When the MA-D dials out during an alarm, it will attempt to call all four numbers in the sequence of their position number. The MA-D Control Products prides itself on making quality products. If you have... -
Page 12: Fcc Statement
Control Products, Inc. 1724 Lake Drive West, Chanhassen, MN 55317. Control Products, Inc. will, at its option, either repair or replace the product free of charge and FCC ID: I55HSS202RUS...
Need help?
Do you have a question about the MA-D and is the answer not in the manual?
Questions and answers