end
info 2
Note
The value set in step 4 is stored in memory even
if the power is turned OFF.
If the balance is to be moved to other places, set
the gravity acceleration value of the area where
the calibration using a weight is to be performed,
and calibrate the balance according to the
procedure above. Refer to the next section to set
the gravity acceleration value.
7.2.
Note
Gravity acceleration correction is not required when
the balance is calibrated using a calibration weight
at the place where the balance is to be used.
Cal
Cal 0
info 1
glp
end
Cal 0
end
7.1. Calibration Using A Weight
100. 0 00
0end000
glp
end000
Cal
Cal 0
9. 7 985
end
Cal 0