General - Marantz M-CR412 Owner's Manual

Contents Connections

General

Alarm
Audio from the set input source can be played back at a specified time.
Use this to set playback for the same time every day, or set alarm
playback on a certain day of the week. Set the current time in advance
from "Clock" in the settings menu. (v p. 68)
o Alarm 1
Alarm start time -
Repeat setting:
Off:
o Alarm 2
Alarm start time -
Repeat setting:
Off:
0 When setting Alarm 1 or Alarm 2 for the first time after purchasing this unit, "Not
Set" is displayed. Press ENTER to switch to the alarm start time setting screen.
Follow steps 2 onward in "Edit Alarm" (next section).
Front panel Rear panel
Playback
Enables Alarm 1.
Disables Alarm 1.
Enables Alarm 2.
Disables Alarm 2.
Remote control
unit
Settings
o Edit Alarm
Used to edit Alarm 1 or Alarm 2.
1
Use ui to select Alarm 1 or Alarm 2, then press
ENTER.
2
Use ui to setting for the alarm start time, then press
ENTER.
3
Use ui to select a repeat setting, then press ENTER.
Never:
Everyday:
Weekdays:
Weekends:
Custom:
67
Index
Tips Appendix
Alarm is not repeated. (single time only)
Alarm is repeated every day.
Alarm is repeated on weekdays (Mon.
to Fri.) only.
Alarm is repeated on weekends (Sat.,
Sun.) only.
Used to set alarm on/off settings
individually for each day of the week.
Alarm is repeated only on days set to
on.