Pairing With Other Bluetooth Devices - Marantz M-CR412 Owner's Manual

Contents Connections

Pairing with other Bluetooth devices

Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your Bluetooth
device.
2
Press and hold Bluetooth for 3 seconds or longer.
This unit will go into the pairing mode.
Pairing can also be done by pressing BLUETOOTH on the main
0
unit.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
Front panel Rear panel
Playback Settings
Reconnecting to this unit from a
Bluetooth device
After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.
1
2
3
4
0 When the power of this unit and the Bluetooth function of this unit are turned on,
the input source will be automatically switched to "Bluetooth" if a Bluetooth device
is connected.
0 When a Bluetooth device is connected with the unit in the Bluetooth standby state
(the power indicator turns red), the power of the unit will be turned on
automatically.
52
Remote control
unit
Tips
If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device
to be connected.
Select this unit from the Bluetooth device list on your
Bluetooth device.
Play music using any app on your Bluetooth device.
Index
Appendix