Playback Procedure - Sony DSR-40/40P Operating Instructions Manual

Playback Procedure

Notes
• When controlling this unit from an editing controller connected to the
REMOTE connector, set the REMOTE/LOCAL switch to REMOTE.
When not, set it to LOCAL.
• Do not insert the cassette forcibly. The VCR may be damaged.
1
After checking the tape for slack, hold the cassette so that the tape
window is facing upward, then insert it into this unit as illustrated
below.
For details on checking the tape for slack, see page 9.
The cassette is automatically drawn into the unit.
2
Press PLAY.
This starts the playback operation.
Mini size
Insert the mini-size cassette into
the center of the cassette
compartment.
Standard size
Tape window facing upward
Chapter 2 Playback and Recording
19 GB