HP Elite Slice Disassembly Instructions Manual page 8

Document No. : Slice FA Disassembly SOP
Operation name :
Disassembly top cover
1
4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard)
Cross electrical screw driver #1
Standard Operation Procedure
Step：
1. Loosen screw *4 of the middle frame (Fig.
3  Torque：3.0 ± 0.2 Kgf．cm
2. Turn over the machine , and disassembly
2
3.
Disassembly cable (6017B0773101)
Fig. 1
4.
Qty
1
Auditor： Stanley Chen
Ver. :
0.10
1)
top case . (Fig.2)
Only for Touch model
connector on touch/B , and disassembly
the other side connector on M/B . Put the
cable in the box . (Fig.3)
Only for charger model
Disassembly cable connector on touch/B ,
and disassembly the other side connector
on M/B . Put the cable in the box . (Fig.3)
Touch ,charger CNTR
Fig.2
Holding fixture list (holding fixture standard)
Station : 5(1/1)
Date :
2016/6/29
Fig. 3
Fig.4
NPSU-PPE
Issue Dept.：
Qty