Cleaning The Boiler Heating Surfaces; Checking The Gaskets And Thermal Insulation Sections - Viessmann VITORONDENS 200-T Service Instructions Manual

Commissioning, inspection, maintenance

Cleaning the boiler heating surfaces

A
Fig. 5
Cleaning brush (accessories)
A
1. Clean the boiler heating surfaces with cleaning
brush and vacuum cleaner.
2. Remove stubborn soot deposits with alkaline
agents containing surfactant additive (e.g. Fauch
400 *1 ).

Checking the gaskets and thermal insulation sections

1. Check gaskets and packing cords in the boiler door
for damage.
2. Check the thermal insulation sections of the boiler
door for damage.
Manufacturer: Hebro Chemie GmbH, Rostocker Strasse 40, D-41199 Mönchengladbach
*1
10
Note
■ Ensure that no cleaning agent gets between the
boiler body and the thermal insulation.
■ Only use solvent-free cleaning agents.
Manufacturer's instructions about the cleaning
agent
3. Replace any damaged components.
4. If a sound insulation set (accessories) is connec-
ted: Check the exterior grille of the vent on the
back of the boiler and clean if required.