Approvals; Safety Rules - Martin Audio BlacklineX Powered XP12 User Manual

Approvals

SAFETY IEC60065:2002 + A1:2006
Country of origin United Kingdom
EMC EMISSION EN55103-1:2009 + A1:2012
EMC IMMUNITY EN55103-2:2009
FCC CFR47 PART 15B-2015
ICES-003:2012
This is a class A product. In a domestic environment this product may cause radio interferences in which case the user may be required
to take adequate measures.

Safety Rules

• This BlacklineX Powered product must be powered exclusively by an earth connected mains socket in electrical networks compliant
to the IEC 364 or similar local rules. It is vital that the user verifies this fundamental safety requirement. If you are in any doubt, get
the installation checked by qualified personnel before use.
• The means of disconnection from the mains is the mains plug. We strongly recommend that you power the BlacklineX Powered
loudspeakers via a professionally installed mains supply with an easily accessible on/off switch or circuit breaker.
• Before powering the BlacklineX Powered loudpeaker, make sure that the unit is supplied with the correct mains operating voltage:
100 - 240V ~ 50 - 60Hz.
• The BlacklineX Powered products are protected by internal fuses located on the main amplifier board designated F500
• Do not use this unit if the electrical power cord is frayed or broken.
• Do not remove the cover. Removing the cover will expose you to potentially dangerous voltage.
BLACKLINEX POWERED USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
BLACKLINEX POWERED USER GUIDE
6