Badge Rotation - Martin Audio BlacklineX Powered XP12 User Manual

Be careful not to over-tighten and cross-thread the screws in the cabinet baffle, it is only wood so doesn't need to be too tight:

Badge Rotation

When used in landscape you should rotate the Martin Audio badge on the grille. The badge is spring loaded and very easy to rotate and can
only be turned in fixed 90° increments so you will have no problem making sure that it is straight.
The badge is easier to rotate if the grille is first removed. With the grille removed push the spigot holding the badge in place so the badge
is protruding forward from the grille and is proud of the recess in which it sits. Rotate the badge as required and release the spigot on the
rear so it settles back into the recess in the grille. The grille can then be replaced:
The badge is supplied with a plastic film to protect it from scratches. This should be left in position until the cabinet is fitted in position
in a fixed installation or is ready for use in portable applications when it can be peeled off and discarded.
BLACKLINEX POWERED USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
BLACKLINEX POWERED USER GUIDE
31