Table of Contents
Advertisement
Safety
Instructions
It is important that loudspeaker systems are used in a safe manner. Please take some time to review the following points concerning safe
use of BlacklineX Powered loudspeaker systems.
Professional loudspeakers are capable of producing extremely high sound levels and should be used with care. Hearing loss is cumulative
and can result from levels above 90dB if people are exposed for a long period. Never stand close to loudspeakers driven at high level.
Pole or Stand Mounting
BlacklineX Powered full-range loudspeakers incorporate pole mounting ("top hat") sockets so that they may be pole or stand mounted.
When using poles or stands, the following precautions are advised:
•
Ensure that the stand will support the weight of the loudspeaker by checking the stand manufacturers rating. (See the Section 10 –
Technical Specifications - for individual BlacklineX Powered weights and dimensions)
•
Make sure that the stand is placed on a level surface and that its legs are fully extended.
•
Do not place more than one loudspeaker on each stand.
•
Run cables so that they do not present a trip hazard which could pull the loudspeaker over.
•
When used outdoors in the wind, it may be necessary to add some weight to the base of the stand.
•
When using a pole mount with a sub-bass system, observe similar precautions.
Stacking
•
Ensure that the floor or stage is level and solid.
•
Do not stack loudspeakers too high outdoors where winds could topple the stack.
•
Be aware that loudspeakers producing high-power levels can move or creep. To avoid this, place friction material between the floor and
loudspeaker and between each loudspeaker or use strapping to secure the stack.
Rigging and Suspension
WARNING: Suspending the system should only be done by qualified personnel following safe rigging practices. Secure fixings to the
building structure are vital. Seek help from architects, structural engineers or other specialists if in any doubt.
BlacklineX Powered Series enclosures are designed for portable applications but can be suspended singly by means of the threaded inserts
provided. Enclosures are fitted internally with steel corner reinforcement brackets, where necessary, to ensure that each cabinet is strong
enough to be hung from its top.
•
Never suspend one enclosure from another to form an array or cluster using these fittings.
•
The common practice of using commercially available eye bolts for suspension should only be undertaken with great caution. Only
forged shoulder eye bolts should be considered, and it is important that the thread length is at least 30mm.
•
Formed eye bolts i.e. those which are formed from a steel rod bent into an eye are not recommended.
•
Eye bolts are strongest along the thread axis. Angling the enclosure will result in an angle pull and it is important to use eye bolts that
are safe in these circumstances.
BLACKLINEX POWERED USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
BLACKLINEX POWERED USER GUIDE
11
Advertisement
Table of Contents
