Accessories
Wall Bracket
The XP12 can be wall mounted using the standard WB10/12B bracket from Martin Audio. This is a two-part bracket enabling the wall
section to be fitted at first fix stage when cables are run. The cabinet half can be fitted to the loudspeaker in advance of arriving at site
so that final installation is just a case of joining the two halves of the bracket and adjusting the position for the coverage required and
connecting the cable. The part number is as follows:
XP12
WB10/12
Eye Bolts
All BlacklineX Powered loudspeakers have threaded inserts available for flown applications in fixed installations. Both full range cabinets
have M8 inserts and the XP118 has M10 inserts. The inserts can be used for fitting bespoke flying hardware or for flying using eye bolts.
These must be forged steel shouldered types certified with a safe working load in excess of the cabinet weight.
Do NOT be tempted to use cheaper formed steel types commonly available from DIY stores as they are unsafe for flying heavy speaker
cabinets.
Correctly rated shouldered eye bolts are available from Martin Audio as an optional accessory. Part numbers are as follows:
M8 (XP12, XP15)
HTK00003
M10 (XP118)
HTK00004
Pole Mount
BlacklineX Powered loudspeakers have integral pole mount "top hat" fittings. These are fitted to the base of all full range speakers; XP12
and XP15, and on the top of the XP118. The fittings all use the standard 35mm diameter so they can be used with any regular speaker
stand or accessory. The fitting in the subwoofers allows use of a mounting pole to elevate one of the full range cabinets on top of the sub
without the need for a bully and unsightly tripod stands. Martin Audio also make a distance pole specifically for use with the BlacklineX
Powered range. This will support any of the full range cabinets at the optimum height above an XP118. The part number is as follows:
Pole
HTKCT04
BLACKLINEX POWERED USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
BLACKLINEX POWERED USER GUIDE
10