Table of Contents
Advertisement
BLACKLINEX POWERED USER GUIDE
Wall Mounting
Wall Bracket
XP12 can be wall mounted in portrait mode using wall bracket. The XP12 uses part number WB10/12B.
Installation is a two-part process in common with standard first fix and second fix procedures, installation using both sizes of brackets is
identical, the WB10/12 bracket is just larger than the WB6/8 version.
The first step is to separate the two halves of the bracket. There are two horizontally mounted nut and bolts holding the two halves together.
The upper one which sits in a curved slot does NOT need to be removed. Unscrew the lower bolt and the cabinet bracket will lift off the
wall bracket:
First fix is to secure the wall section of the bracket. This is the part with four mounting holes, a vertical bolt holding the section which
allows horizontal adjustment and the slot into which the cabinet bracket bolt sits. Use appropriate wall fixings suitable for the composition
of the wall. These must be of sufficient strength to support the weight of the loudspeaker:
BLACKLINEX POWERED USER GUIDE V1.0
32
Copyright © 2019 Martin Audio Ltd.
Advertisement
Table of Contents
