Advertisement
Installation
Cut out the work surface according to the sizes shown in the following drawings.
For the purpose of installation and use, a minimum of 5cm space shall be kept around the
hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
and insulated work surface material (Wood and similar fibrous or hygroscopic material shall
not be used as work surface material) to avoid electrical shock and larger deformation caused
by the heat radiation from the hotplate.
Note: The safety distance between the sides of the hob and the inner surfaces of the
worktop should be at least 3mm.
L(mm)
W(mm)
590
520
Under all circumstances, make sure the induction cooktop is well ventilated and the air inlet
and outlet are not blocked. Ensure the induction cooktop is in a good working state.
Note: The safety distance between the cooktop and any cupboard above the cooktop
should be at least 760mm.
A(mm)
760
H(mm)
D(mm)
60
B(mm)
C(mm)
50 (min)
20 (min)
A(mm)
B(mm)
56
560+4
+1
D
Air intake
6
X(mm)
490+4
50 (min)
+1
Air exit 5mm
F(mm)
3 (min)
E
Advertisement
