Advertisement
Installation
Selection of Installation Equipment
For the purpose of installation and use, a minimum of 5cm space shall be preserved around
the hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-
resistant and insulated work surface material (Wood and similar fibrous or hygroscopic
material should not be used as work surface material) to avoid the electrical shock and larger
deformation caused by the heat radiation from the hotplate.
Note: The safety distance between the sides of the hob and the inner surfaces of the
worktop should be at least 3mm.
L(mm)
W(mm)
590
520
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the ceramic cooker hob is in good working state. As shown
below
Note: The safety distance between the hotplate and the cupboard above the hotplate
should be at least 760mm.
A(mm)
760
W(mm)
D(mm)
55
51
B(mm)
C(mm)
50 (min)
20 (min)
A(mm)
B(mm)
560+4
490+4
+1
+1
D
Air intake
5
X(mm)
F(mm)
50 (min)
3 (min)
E
Air exit 5mm
Advertisement
