Listening To Dab/Dab+ (Available For The Uk Model Only); Performing A Dab/Dab+ Initial Scan; Tuning In A Dab/Dab+ Station - Sony NAS-SV20DI User Manual

Listening to DAB/DAB+ (available for the
UK model only)
You can tune in DAB/DAB+ stations. Presetting
stations in advance allows you to recall them by
number.
DAB/DAB+ stations can be received with the UK
model only.
MEMORY
FUNCTION
BACK
./>
Performing a DAB/DAB+
Initial Scan
When you select the DAB/DAB+ function for the
first time after purchase, the unit automatically
starts a DAB/DAB+ Initial Scan and obtains a
DAB/DAB+ service component list. However, you
can perform a DAB/DAB+ Initial Scan manually.
1
Press FUNCTION repeatedly to
select the DAB/DAB+ function.
"DAB" lights up on the display.
2
When "Start Initial Scan? Press
ENTER." appears, press ENTER.
The DAB/DAB+ Initial Scan starts. When
scanning is completed, a service component
list (a list of available DAB/DAB+ stations)
is created.
GB
36
Tip
You can perform the Initial Scan manually. Press
OPTIONS and select "Initial Scan." When "Start Initial
Scan? Press ENTER." appears, press ENTER.
Notes
•
All preset stations that have been stored in the unit are
cleared when you perform a DAB/DAB+ Initial Scan or
when scanning is cancelled.
•
Before unplugging the DAB/DAB+ wire antenna
(aerial), make sure the unit is turned off to preserve
M/m/ENTER
your own DAB/DAB+ settings.
DISPLAY
Tuning in a DAB/DAB+
station
1
Be sure that the DAB/DAB+ Initial
Scan has been performed and a
service component list has been
created.
2
Press FUNCTION repeatedly to
select the DAB/DAB+ function.
"DAB" lights up on the display.
3
Press ./>.
The unit tunes in to the previous or the next
DAB/DAB+ station on the service
component list.
Station name
Channel label
DLS (Dynamic Label Segment)