Preparing The Unit And The Remote Control; Connecting The Antenna And The Power Cord - Sony NAS-SV20DI User Manual

Preparing the unit and the remote control

Connecting the antenna and the power cord

Note
If you place the unit in an unstable location, it may move when you connect or disconnect cables. Hold the unit firmly
when you connect or disconnect cables.
WARNING
DO NOT plug the power cord
into a wall outlet until all other
connections have been made.
3
To a wall outlet
1
Connect the DAB/DAB+ wire
antenna (aerial) to the ANTENNA
DAB 75 Ω terminal (UK model
only).
Power cord
2
* The DAB/DAB+ wire antenna (aerial) and the ANTENNA DAB 75 Ω are available for
the UK model only.
DAB/DAB+ wire antenna (aerial)
DAB/DAB+ wire antenna (aerial)*
AC adaptor
Use an external DAB/DAB+ antenna for a
more robust DAB/DAB+ signal. It is
recommended you only use the supplied
DAB/DAB+ wire antenna for areas of strong
DAB/DAB+ reception or as a temporary
measure until you install an optional external
antenna.
Use a 75 Ω coaxial cable with male F type
connector to connect the unit to an external
antenna.
Be sure that the antenna is fully extended.
1
GB
15