Easy Mode (E-Mail) - Sony IPELA SNC-P1 User Manual

Easy mode (e-Mail)

This is displayed when you click e-Mail (SMTP) of the
Easy mode menu.
Note
While the camera video mode is set to MPEG4, the
image of the composite video signal output from the
video output connector of the camera may be distorted
during mail transmission.
e-Mail (SMTP)
Select On when you use e-Mail (SMTP) function. When
you select On, setting options are displayed. If you do
not use it, select Off and click OK below.
SMTP server name
Type the SMTP (sending mail) server name up to 64
characters, or type the IP address of the SMPT server.
Authentication
Select the authentication required when you send an e-
Mail.
None: Select when no authentication is necessary when
an e-mail is sent.
SMTP Authentication: Select when authentication is
necessary when an e-mail is sent.
POP before SMTP: Select when POP before SMTP
authentication is necessary when an e-mail is sent.
POP server name
Type the POP (receiving mail) server name up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends
e-mails performs authentication using the POP user
account.
User name, Password
Type the user name and password of the user who has
the mail account. This setting is necessary when the
SMTP server which sends e-Mails performs
authentication.
Recipient e-Mail address
Type the address to which you send e-Mails to up to 64
characters. If you want to send to two or more addresses,
set them in the e-Mail (SMTP) setting menu (page 43) of
the Advanced mode menu.
Administrator e-Mail address
Type the e-Mail address of the administrator of the
camera up 64 characters.
This will be the address for return mail and system mail
from the mail server.
Subject
Type the subject up to 64 characters.
Message
Type the text up to 384 characters (Return corresponds
to two characters).
Mode
Set the e-Mail sending mode.
Motion detection: When the camera detects any action,
it sends the image file.
If you select Motion detection, the camera detects
activity in the shooting image due to the built-in motion
detection function. Then the camera sends the e-Mail
with the attached image file.
Set the details of the motion detection of the camera in
the Motion detection setting menu (page 57) of the
Advanced mode menu.
Note
The picture attached to the e-Mail is of the moment the
motion detection function of the camera works. If the
next activity is detected during processing of the image
of the first detection, the process will be rejected.
The motion detection function may not work properly in
the following cases.
• During camera setting operation in the Camera setting
menu.
• When the object is dark.
• When the camera is shaken because the installation
location is unstable.
Basic Operations of Easy mode
27