Basic Configuration By The Administrator - Sony IPELA SNC-P1 User Manual

Basic Configuration by
the Administrator
You can monitor the image of the camera by logging in
with the initial condition of this network camera. You
can also set various functions according to the install
position, network condition or purpose of the camera.
We recommend you configure the following items
before monitoring the image from the camera.
Setting contents
Select the white balance mode according to the installing
position (indoor or outdoor).
Flip the image according to the installation position (desk top or
ceiling).
Select the brightness of the blue LED on the top of the camera.
Set the format of the image sent from the camera (MPEG 4 or
JPEG).
Select the brightness of the image sent from the camera.
Select the quality of the image sent from the camera.
Select the size of the image sent from the camera.
Select weather the audio from the camera microphone is sent or
not.
Accord date and time of the camera with those of the computer.
Make the setting for sending the monitor image attached to a
mail.
Set the access right of the user for the camera.
Easy mode menu
White balance (page 26)
Mount (page 26)
Blue LED (page 26)
–
Brightness (page 26)
Image quality (page 26)
Image size (page 26)
Microphone (page 26)
Date & time setting
(page 26)
e-Mail (SMTP) (page 26)
Easy mode (e-Mail)
(page 27)
–

Basic Configuration by the Administrator

Advanced mode menu
White balance (page 35)
Image flip (page 35)
Blue LED (page 31)
Video mode (page 34)
Exposure mode (page 36)
Brightness (page 36)
MPEG4 Tab (page 36)
JPEG Tab (page 37)
Image size (page 34)
Microphone (page 35)
Date & time Tab (page 31)
e-Mail (SMTP) setting Menu
(page 43)
User setting Menu (page 41)
15