Recording A Still Image In The Built-In Memory Of The Camera; Controlling Alarm Output - Sony IPELA SNC-P1 User Manual

Recording a Still Image
in the Built-in Memory of
the Camera
You can capture a camera image as a still image and
record it in the built-in memory of the camera.
To use this function, you need to make Image memory
active and to set details of the image memory in the
trigger setting menu on the Advanced mode menu
(page 54).
1
Monitor the image on the monitor window.
2
Select Image memory from the Trigger list box.
3
Click .
The still image of the moment when you click is
captured, and the image file is recorded in the built-
in memory of the camera.

Controlling Alarm output

You can control the Alarm output On (short-circuit) and
Off (open).
To use this function, you need to make Alarm output
active in the Trigger setting menu on the Advanced
mode menu (page 55).
1
Monitor the image on the monitor window.
2
Select Alarm output from the Trigger list box.
3
Click
Each click switches the Alarm output between On
(short-circuit) and Off (open) alternately.
Tip
For the connection of peripheral devices to the Alarm
output of the I/O port, see the supplied Installation
Manual.
Recording a Still Image in the Built-in Memory of the Camera / Controlling Alarm output
.
23