Selecting Rf Or Ir Remote Control Reception (Sat-A55 Only) - Sony SAT-A55 Operating Instructions (primary manual) Operating Instructions Manual

Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)
ALT AUDIO JUMP
FAVORITE INDEX CATEGORY
VOL
MENU
EXIT
VTR3 2 DVD AMP
CODE SET
SATELLITE
RECEIVER
RM-Y802
Remote Control
Remote Signal
Lets you select IR or RF as the type
of signal the receiver accepts.
RF Security Control
Lets you change the security code.
RF signals are used to control
many devices. You may need to
change the security code so that
this remote control operates the
Digital Satellite Receiver only.
32
Selecting RF or IR Remote Control
GUIDE
Reception (SAT-A55 only)
The RF feature allows you to operate the Digital Satellite Receiver from
CH
outside a cabinet or from another room within your home. The RF
Antenna must be connected to use the RF feature (see page 12).
1 Press the MENU button, then highlight and select
RM-Y802
SYSTEM.
The SYSTEM pop-up appears.
MENU
2
Highlight and select "Remote Control".
The Remote Control display appears.
3
Highlight and select "Remote Signal".
The Remote Signal pop-up appears.
Return
Closes the Remote Control
display to show the Main Menu.
Help
Opens information about the
Remote Control display.