Sony SAT-A55 Operating Instructions (primary manual) Operating Instructions Manual page 27

POWER
MUTING
CABLE TV
SAT
AUDIO FUNCTION
SAT
VOLUME CABLE TV
+
SLEEP TV/SAT TV/VIDEO
1 2
3
4
5 6
7 8 9
DISPLAY ENTER
0
ALT AUDIO JUMP
GUIDE
FAVORITE INDEX CATEGORY
VOL CH
MENU
EXIT
VTR3 2 DVD AMP RM-Y802
CODE SET
SATELLITE
RECEIVER
RM-Y802
Remote Control
z
Tip
If you connected a Sony SmartFile VCR,
use the manufacturer code of 99.
Note
Do not stop or interrupt the VCR test by
pressing any buttons until after the VCR
test is complete.
Setting the VCR Manufacturer Code
The VCR Manufacturer Code allows the Digital Satellite Receiver to
control your VCR using the VCR Controller or a Sony SmartFile VCR.
1
Highlight and select "Manufacturer" from the VCR
Control display (see page 26).
The Manufacturer pop-up appears.
2
Highlight and select the manufacturer of your VCR.
The manufacturer's pop-up appears.
3
Select a VCR manufacturer code from the list.
The Test pop-up appears.
Some manufacturers have more than one code to choose from.
If the VCR manufacturer code you select does not work in step 4
below you can select another code for that manufacturer.
4
Select "Yes" to perform a VCR test.
If you select "Yes", a pop-up appears giving you instructions on
how to perform a VCR test.
If the test is unsuccessful, check your connections and the VCR
Controller placement, then repeat this procedure selecting a
different VCR manufacturer code in step 3 (if your VCR
manufacturer has more than one code).
continued
27