Sat-A55 Back Panel - Sony SAT-A55 Operating Instructions (primary manual) Operating Instructions Manual

SAT-A55 Back Panel

1
qs qa
1 ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
2 SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
3 RF REMOTE jack
Inputs remote control signals using the RF
Antenna.
4 CH3/CH4 switch
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
5 VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
6 AC IN jack
Inputs AC power from a power outlet using the
AC Power Cord.
2 3
q; 9
4 5
8 7
7 TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
8 VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
9 A/V OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
q; LOW SPEED DATA
Can be used for future products such as Personal
Video Recorders.
qa VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also allows connection of a
monaural cable for use with Sony SmartFile
VCRs.
qs DIGITAL OUT (OPTICAL)
Outputs digital audio signals to the digital optical
input of your audio receiver.
6
69