Edwards & Co Capsule 2 Series Instruction Manual page 18

Caring for your car seat
Important information
• NEVER
lubricate or oil any part of the seat.
•
Only use mild detergents.
•
Wipe clean the seat shell, harness and EPS foam lining inside
only.
• NEVER
use solvents, harsh detergents or washing up liquids as
these may damage the harness and seat.
• NEVER
wring any fabrics.
•
Dry thoroughly before storage.
•
Store in a well-ventilated area, away from direct sunlight which
could damage or fade your car seat.
•
Store in a safe place when it is not being used. Avoid placing
heavy objects on top of it.
• NEVER
allow the seat to come into contact with corrosive sub-
stances such as battery acid or petroleum products.
Cleaning the fabric cover:
• Hand wash in warm water only.
NEVER
•
To remove the cover from the car seat:
1. Remove the harness by gently feeding it through from the front
to the back of the seat.
2. Remove the crotch strap, including buckle, by rotating it a
quarter turn and feeding it out through the seat shell. The cover
should now be free of obstruction.
3. Remove the cover and hand wash it at about 30ºC; dry flat away
from direct heat.
4. To replace repeat the instructions above in reverse.
WARNING
– ensure the harness is correctly fitted. Please follow the
'Adjusting the shoulder belt height' section for more information on
harness fitting. If you are unsure please contact Edwards & Co.
tumble dry.
18