Using The Menu System; General Operation; Program List; Favorite List - Sony DST-HD500 Operating Manual

Sony high definition digital receiver operating guide
Table of Contents

Advertisement

Using the menu system

General operation

All the menus of this receiver are accessed by pressing the MENU button on the remote control or the front
panel.

Program List

Program List
Program List
Ten HD
06-0012
Ten Digital
06-0013
Ten Digital
06-0014
Ten Digital
06-0015
Ten Digital
06-0016
Ten Digital
06-0017
Select :
Confirm :
EXIT :

Favorite List

Favorite List
Favorite List 1
Digital ABC
07-0018
Digital SBS
08-1008
Digital 10
04-0032
Select :
Confirm :
EXIT :
12
Using the menu system
1
Use the following buttons to operate the menu:
- Press the V or v button to highlight the required option.
- Press the OK or b button to enter the option.
- Press the V, v, B and b buttons to alter settings.
- Press the OK button to store each change you make,
- or press the RETURN button to cancel.
2
Press the RETURN button to go back one step or press the
MENU button to return to normal operation.
Most menu screens will automatically disappear after 90 seconds with
no buttons being pressed.
The Program List is a list of the available channels.
1
Press the MENU button to display the menu system.
2
symbol highlighted, press the b or OK button to
With the
display the Program List.
3
Press the V or v buttons to highlight the required channel.
4
Press the OK button to exit the Program List and display the
selected channel.
Alternatively, in normal operation, press the LIST button on the remote
control to display the 'Program List'.
The Favorite List allows you to store your favorite channels in a list for
easy access.
To watch a Favorite channel
1
Press the MENU button to display the menu system.
2
With the
symbol highlighted, press the V or v buttons to
highlight Favorite List 1 or Favorite List 2. Press the
buttons to display the Favorite List.
Press the V or v buttons to highlight your favorite channel.
3
4
Press the OK button to exit the Favorite List and display the
selected channel.
Once you have used the Favorite List to select and view a channel,
pressing the PROG +/- buttons will select only channels from your
Favorite List. To cancel this, select a different channel using the
Program List.
Alternatively, in normal operation, press the
control to cycle through 'Favorite List 1', 'Favorite List 2' and exit from
the Favorite List.
b
or OK
button on the remote

Advertisement

Table of Contents
loading

Table of Contents