Sony DST-HD500 Operating Manual page 9

Connecting to an SD TV/display screen via S-Video
RF cable (supplied)
To mains
Rear of TV/display screen
RF IN
AC Cord
(supplied)
1 Connect your aerial cable to the socket labelled RF IN on the
rear of the receiver.
2
Connect the supplied RF cable from the socket labelled RF
OUT on the rear of the receiver to the aerial socket on your
TV/display screen.
3 Connect an S-Video cable (not supplied) from the socket
labelled S-VIDEO on the rear of the receiver to the S-Video
input sockets on your TV/display screen.
4 Connect the supplied AV cable from the sockets labelled L, and
R on the rear of the receiver to the audio input sockets on your
TV/display screen. (The yellow video jack does not need to be
connected.)
5
Connect the supplied AC cord from the AC IN socket on the
rear of the receiver to your mains socket (100 - 240V AC,
50/60Hz).
S-VIDEO
AUDIO
L
R
S-Video
cable (not
supplied)
RF IN
Y
CVBS
P b
P
r
RF OUT
S-VIDEO
ANT. VIDEO OUTPUT RS-232
Getting Started
Video jack (not required)
AV cable (supplied)
Video jack
(not required)
DIGITAL ANALOG
L L
COAX.
OPTICAL
R R
AUDIO OUTPUT
Getting Started
9