Page 19
OPERATING MANUAL COOL MODEL ROOM AIR CONDITIONER WALL MOUNTED TYPE Indoor Unit ASWX18FAT Outdoor Unit AOWX18FAT KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE FUJITSU GENERAL LIMITED PART NO. 9385989054...
CONTENTS SAFETY PRECAUTIONS ........En-1 ADJUSTING THE DIRECTION OF FEATURES AND FUNCTIONS ......En-2 AIR CIRCULATION ..........En-10 NAME OF PARTS ..........En-3 SWING OPERATION ..........En-11 PREPARATION ............En-5 POWERFUL OPERATION ........En-12 OPERATION ............En-6 CLEANING AND CARE ........En-13 TIMER OPERATION ..........En-8 TROUBLESHOOTING ........En-15 SLEEP TIMER OPERATION ........En-9 OPERATING TIPS ..........En-16 MANUAL AUTO OPERATION ......En-9 SAFETY PRECAUTIONS...
FEATURES AND FUNCTIONS AUTO CHANGEOVER REMOVABLE INTAKE GRILLE The operation mode (cooling, dry) is switched automatically The indoor unit’s Intake Grille can be removed for easy to maintain the set temperature, and the temperature is kept cleaning and maintenance. constant at all times. MILDEW-RESISTANT FILTER PROGRAM TIMER The AIR FILTER has been treated to resist mildew growth,...
NAME OF PARTS Fig. 1 Indoor Unit Intake Grille (Fig. 2) (1-1) Air Cleaning Filter • behind Air Filter. • This part is optional for ASWX18FAT. Operating Control Panel (Fig. 3) (1-2) Front Panel Indicator (Fig. 4) (1-3) Air Flow Direction Louver...
PREPARATION Load Batteries (R03/LR03 × 2) CAUTION! ● Take care to prevent infants from accidentally swallowing batteries. Press and slide the battery compartment lid on the ● When not using the Remote Controller for an extended period, remove the reverse side to open it. batteries to avoid possible leakage and Slide in the direction of the arrow while pressing the mark.
OPERATION To Select Mode Operation Press the START/STOP button [Fig.6 (6-9)]. The indoor unit’s OPERATION Indicator Lamp (green) [Fig. 4 (4-1)] will light. The air conditioner will start operating. Press the MODE button [Fig.6 (6-1)] to select the desired mode. Each time the button is pressed, the mode will change in the following order.
Page 26
To Stop Operation Press the START/STOP button [Fig. 6 (6-9)]. The OPERATION Indicator Lamp (green) [Fig. 4 (4-1)] will go out. About AUTO CHANGEOVER Operation ● When AUTO CHANGEOVER operation fi rst selected, the fan will operate AUTO: at very low speed for 1 ~ 3 minute, during which time the unit detects the room conditions and selects the proper operating mode.
TIMER OPERATION Before using the timer function, be sure that the Remote Controller is set to the correct current time (☞ P. 5). To Use the ON timer or OFF timer Press the START/STOP button [Fig.6 (6-9)] To Cancel the Timer Use the TIMER MODE button to select (if the unit is already operating, proceed to step 2).
SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped. To Use the SLEEP Timer To Cancel the Timer: While the air conditioner is operating or stopped, press the Use the TIMER MODE button to select “CANCEL”.
ADJUSTING THE DIRECTION OF AIR CIRCULATION ● Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Controller. ● Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airfl ow-direction louvers have stopped moving.
SWING OPERATION Begin air conditioner operation before performing this procedure. To select SWING Operation Press the SWING button [Fig. 6 (6-12)]. The SWING Display [Fig. 7 (7-6)] will light. Each time the SWING button is pressed, the swing operation will change in the following order.
POWERFUL OPERATION The air conditioner runs at the maximum fan speed. Use the Powerful operation to cool down the room quickly or circulate the air in a room. To select POWERFUL Operation Press the POWERFUL button [Fig. 6 (6-3)] The indoor unit’s POWERFUL Indicator Lamp (green) [Fig.4 (4-3)] will light. (The Powerful operation is not indicated on the remote controller.
CLEANING AND CARE ● Before cleaning the air conditioner, be sure to turn it off and disconnect the Power Supply Cable. CAUTION! ● Be sure the Intake Grille [Fig. 2] is installed securely. ● When removing and replacing the air fi lters, be sure not to touch the heat exchanger, as personal injury may result.
Page 33
Air Cleaning Filter Installation Replacing dirty Air cleaning fi lters Replace fi lters with the following components (purchased (This part is optional for ASWX18FAT.) separately). 1. Open the Intake Grille and remove the Air ● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FA13-1 fi...
TROUBLESHOOTING In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electri- WARNING! cal breaker or disconnect the power supply plug, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source.
OPERATING TIPS AUTO Restart In Event of Power Interruption ● The air conditioner power has been interrupted by a power failure. The air conditioner will then restart automatically in its previous mode when the power is restored. ● Operated by setting before the power failure. ●...