MB QUART STAGE 2 MBQ-STG2-BT Installation Manual page 26

26
STEP 8 – With the compression horn wired properly you can position the speaker and mount
with the included hardware. We suggest you mount with hand tools to avoid blowing out the
screws. Final speaker position is shown in FIG 9-7.
(FIG 9-7)
Repeat the process from STEP 1 – 8 for the passenger side kick panel.
For additional technical information, go to the "SUPPORT" tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA