MB QUART STAGE 2 MBQ-STG2-BT Installation Manual page 21

Next, use your Sharpie to mark the mount holes on the painters tape. Repeat the mounting
process for the other pod Shown in FIG 9-2.
STEP 2 - Drill (4) 5/16 inch holes into the fender where you marked the tape shown in FIG 9-3.
For additional technical information, go to the "SUPPORT" tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
(FIG 9-2)
(FIG 9-3)
©2018 Maxxsonics USA
21