MB QUART STAGE 2 MBQ-STG2-BT Installation Manual page 17

NOTE – Once the amplifiers are connected, make the following adjustments to the
setting. See CHAPTER 10 – TEST & TUNE for additional information on final
system adjustments and best-settings.
TUNED PACKAGE
MBQ-STG-5-1
MBQ-STG-3-1
MBQ-STG-2-1
MBQ-SUBSYS-1
NA2-400.2 AMPLIFIER
NA2-400.1 AMPLIFIER
For additional technical information, go to the "SUPPORT" tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
TWO CHANNEL AMPLIFIER
HP-OFF-LP/BP
Switch to HP - High Pass
HP-OFF-LP/BP
Switch to HP - High Pass
HP-OFF-LP/BP
Switch to – OFF
N/A
©2018 Maxxsonics USA
MONO AMPLIFIER
Bass Boost to 0dB
Bass Boost to 0dB
N/A
Bass Boost to 0dB
SEE CHART TO ADJUST
SEE CHART TO ADJUST
17