MB QUART STAGE 2 MBQ-STG2-BT Installation Manual page 19

ILLUMINATION NOTE
For speakers that include illumination, there is a small red/black jumper wire and splitter that
connects the rear speakers harness illumination wire to the left and right rear pod illumination.
You will make this connection in the same location as you are connecting the rear pods in the
center console.
The connection location is the same for both the 2 and 4 seats RZR. Refer to the wiring
diagram for proper placement. See wiring diagram in CHAPTER 14 for quick reference.
NOTE – Any excess wire that is gathered after the system is tested should be wire
tied and secured under the seat. Do not allow any of the wire harness to touch heat
generating or mechanical components of the machine.
For additional technical information, go to the "SUPPORT" tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
19