Panasonic MJ-L600 Operating Instructions Manual page 6

Slow juicer, household use
Hide thumbs Also See for MJ-L600:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Electrical Requirement
FOR YOUR SAFETY PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience. A 5-amp fuse is fitted in
this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-amp and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet
in your home, then the fuse should be removed and the plug
cut off and disposed of safely. There is a danger of severe
electrical shock if the cut off plug is inserted into any 5-amp
socket.
How to replace the fuse
The location of the fuse differs
according to the type of AC
mains plug (figures A and B).
Confirm the AC mains plug
fitted and follow the instructions
below. Illustrations may differ
from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse
and close or attach the fuse cover.
GB10
(For UK market only)
Figure A
Figure B
Figure A
Figure B
Fuse cover
Fuse cover
Parts Names and Handling Instructions
Wash all the detachable parts before using the appliance for the first time or when you have not used it for a
while. (P. GB19)
Food pusher
Feeding tube
Lid
Squeezing screw
Juice / Smoothie
attachment
Juice cone (Black)
Smoothie cone
(Blue)
Rotating brush
Rubber brush
(Two sides)
Juicing bowl
Pulp spout
Motor housing
Mains plug*
Mains lead
* The shape of plug may be different from illustration.
Accessories
Juice container
Pulp container
Cleaning brush
The tip of the handle can be used to remove
pulp from juice spout or pulp spout.
Frozen cone
Safety lock pin (Upper
motor housing side)
(P. GB14)
Spout cap
Juice spout
Power switch
ON: Press to run the juicer.
OFF: Press lightly to stop the
juicer.
REVERSE: Press and hold to allow
reverse rotation.
(Release finger to stop the juicer.)
• This button can be used when the
ingredients are jammed.
GB11

Advertisement

Chapters

Table of Contents
loading

Table of Contents