Advertisement
Isolating switch DX ≤ 63 A
Cat. n°(s) : 4 142 21 / 23 / 24 / 26
direct current, 800V
6. COMPLIANCE AND APPROVALS
In accordance with standards:
. EN/IEC 60947-2
. EN/IEC 60947-3.
. European directives : 73/23/CEE + 93/68/CEE.
. These isolating switches can be used in the conditions of use
defined by IEC/EN 60947 standard.
. The isolating switch performances may be modified in case of
particular climatic conditions.
Plastic materials :
. Halogens-free plastic materials.
. Marking of parts according to ISO 11469 and ISO 1043.
Packaging:
. Design and manufacture of packaging in accordance with Decree
98-638 of 07.20.98 and Directive 94/62/EC
7. AUXILIARIES AND ACCESSORIES
Wiring accessories:
. Sealable screw cover (Cat. No. 4 063 04).
. Insulation shields (Cat. No. 4 063 05).
Signalling auxiliaries:
. Auxiliary changeover switch (½ module – Cat. No. 4 062 58).
. Fault signalling changeover switch (½ module – Cat. No. 4 062
60).
. Auxiliary changeover switch which can be modified into fault
signalling changeover switch (½ module – Cat. No. 4 062 62).
. Auxiliary changeover switch + fault signalling changeover switch
which can be modified into two auxiliary changeover switches (1
module – Cat. No. 4 062 66).
Control auxiliaries:
. It is imperative not to associate control auxiliaries with the
isolating switch .
Auxiliaries and isolating switches combinations allowed :
. Auxiliaries must be fitted on the left side of the isolating switch.
. Maximum of 2 auxiliaries per isolating switch whose only one half-
module wide auxiliary.
Installation software :
. XL PRO
3
Technical data sheet : F01282EN/02
Updated : 24/08/2016
created : 7/10/2011
4 / 4
Advertisement
