Press Menu - Sony VPL-HS3 Operating Instructions Manual

1

Press MENU.

The menu appears.
The menu presently selected is shown as a
yellow button.
MENU
2
Press M or m to select a menu,
and press , or ENTER.
The selected menu appears.
3
Press M or m to select an item
you want to adjust and press
, or ENTER.
The setting items are displayed in a pop-up
menu or in a sub menu.
or
ENTER
28
Operation through the Menus
GB
SET SETTING Input A
S m a r t A PA : O n
Auto Input Search: O f f
Input-A Signal Sel.: C o m p u t e r
C o l o r S y s t e m : Au t o
Pow e r S av i n g : O f f
I l l u m i n a t i o n : O f f
Pop-up menu
Menu Setting items
I n p u t A
Sub menu
Menu Setting items
PICTURE SETTING Input A
ADJUST PICTURE S t a n d a rd
C o n t r a s t : 8 0
B r i g h t n e s s : 5 0
R G B E n h a n c e r : 3 0
G a m m a M o d e : Graphics
C o l o r Te m p : High
4
Make the setting or adjustment
on an item.
When changing the adjustment level
To increase the value, press M or ,.
To decrease the value, press m or <.
Press ENTER to restore the original screen.
When changing the setting
Press M or m to change the setting.
Press ENTER to restore the original screen.
You can restore the original screen using <
depending on the selected item.
To clear the menu
Press MENU.
To reset items that have been
adjusted
Select the item you want to reset, then press RESET.
"Complete!" appears on the screen and the setting is
reset to its factory preset value.
Items that can be reset are:
• "Contrast," "Brightness," "Color," "Hue,"
"Sharpness" and "RGB Enhancer" in "Adjust
Picture..." of the PICTURE SETTING
• "Dot Phase," "H Size" and "Shift" in "Adjust
Signal..." of the INPUT SETTING
• "V Keystone" (when set to "Manual") and "Side
Shot" of the INASTALL SETTING
menu
menu
menu