Connecting To Video Equipment; Connecting To An Av Amplifier - Sony VPL-HS3 Operating Instructions Manual

Connecting to Video Equipment

To connect to video equipment equipped with S video or video output
You can connect a VCR, Sony hard disk video recorder "Clip on" or a laser disk player. See also the instruction
manual for each equipment.
: Video/audio signal flow
Tip
If you do not know to which connector you should connect the cable, S VIDEO (S video connector) or VIDEO (video connector), connect
it to S VIDEO (S video connector) to enjoy better picture quality.
If the equipment to be connected has no S VIDEO (S video connector), connect the cable to VIDEO (video connector).

Connecting to an AV Amplifier

You can enjoy better sound quality by connecting the projector to an AV amplifier using the supplied signal
interface cable.
: Video signal flow
Rear of the projector
S video or video/audio cable
(VMC-810S, not supplied)
Rear of the projector
with SONY logo upside
Signal interface cable (supplied)
to S video or video/
audio output
Active speakers
Y
Video equipment
AV amplifier
P / S Video
P /
B R
C C Video
B R
Step 2: Connecting the Projector
11
GB