Advertisement
Global Rhythm Pattern Pad Mode Settings
With this parameter:
You can:
Trigger Quantize
set the way in which your rhythm
patterns start. You can choose:
•
•
•
Velocity Sens
determine the amount of velocity with
which the rhythm pattern's sounds
play. Select:
•
•
•
•
Rhythm Pattern Pad 1-16 Settings
With this parameter:
You can:
Rhythm Pattern
choose the rhythm pattern to be played
on the pad.
If you construct a set of rhythm patterns you'd like to keep, click F7
(Write) to store it in the current project.
REAL—
so that each
rhythm pattern
begins playing as soon as you hit
its pad.
BEAT—
so that each
rhythm pattern
starts playing at the next beat after
you press its pad.
MEASURE—
so that each
rhythm
starts playing at the next
pattern
measure after you press its pad.
OFF—
to have the sounds play at
the velocity with which they were
sequenced.
LOW—
to play the
rhythm pattern's
sounds with a minimum of
velocity.
MID—
to play the
rhythm pattern's
sounds with medium velocity.
HIGH—
to play the
rhythm pattern's
sounds at maximum velocity.
Pad Mode 7—Tone Sel/Sw
The Tone Sel/Sw (for "Tone Select/Switch") pad mode is a
great power tool when you're editing patches. Each patch
is made up of as many as four "tones. " Tones produce the
sound waves that form the basis of a patch's sound. The
Tone Sel/Sw pad mode lets you quickly select a tone for
editing, or turn a tone on or off.
If you're in
•
Single mode—
the pads control the tones in the currently selected
patch. If you're playing a rhythm set on the keyboard, the pads control
the four waves used by the rhythm tone you've most recently played.
•
Live or Studio mode—
the pads control the tones in the patch played by
the currently selected part. If you've selected a part that uses a rhythm
set and the part's KBD switch is on, the pads control the waves in the
last-played rhythm tone.
•
Pads 1-4—
turn Tones 1-4, respectively, on or off.
•
Pads 5-8—
select Tones 1-4, respectively, for editing.
In a rhythm set, each key on the keyboard plays a different rhythm
tone that can use up to four sound waves.
When a tone is selected or turned off, its pad is unlit. You can also see
the state of your tones on the Pad Setting screen.
9
Advertisement
