Control Panel - Sony VPL-ES3 Operating Instructions Manual

Control Panel

1
2
3
4
a ?/1 (On/Standby) key
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the ?/1 key
flashes in green until the projector is
ready to operate.
b ON/STANDBY indicator (located
around the
Lights up or flashes under the following
conditions:
– Lights in red when the AC power cord
is plugged into a wall outlet. Once the
projector is in standby mode, you can
turn it on with the ?/1 key.
– Lights in green when the power is
turned on, and when it is ready to
operate.
– Flashes in green from the projector is
turned on until the projector is ready to
operate. Also, flashes in green while
the cooling fan is running after the
power is turned off with the ?/1 key.
The fan runs for about 90 seconds after
the power is turned off.
For detail on the ?/1 indicator, see
page 18.
c MENU key
Displays the on-screen menu. Press
again to clear the menu.
10
Location and Function of Controls
5
6
? /1 key)
d PUSH ENTER/
v
keys
Used to enter the settings of items in the
menu system, select a menu, or make
various adjustments.
e INPUT key
f Status indicators
• POWER SAVING
Lights when the projector is in power
saving mode.
• TEMP (Temperature)/FAN
Lights or flashes under the following
conditions:
– Lights when the temperature inside
the projector becomes unusually
high.
– Flashes when the fan is broken.
• LAMP/COVER
Lights or flashes under the following
conditions:
– Lights when the lamp has reached
the end of its life or reaches a high
temperature.
– Flashes when the lamp cover or air
filter cover is not secured firmly.
For details, see page 39.
/ / / (Arrow)
V b B